How to Flash iPhone 6_6S_7_8_X_11_12_13

 

How to Flash Your iPhone’s Firmware

Are you having issues with your iPhone? Is it running slow, stuck on the Apple logo, or unable to exit recovery mode? A firmware flash may be the solution to your problem, allowing you to update or reinstall the iOS on your iPhone. In this video, we’ll show you three methods to get the job done.

Method 1: Update Software Wirelessly

To update your software wirelessly, go to the Settings app and select “General.” From there, choose “Software Update.” If an update is available, go ahead and install it. If your software is already up to date, you can try reinstalling the firmware using iTunes on a computer.

Method 2: Reinstall Firmware Using iTunes

To reinstall the firmware using iTunes, first connect your iPhone to your computer. Then, put your iPhone into recovery mode by following these steps:

• For iPhone 8 or later: Quickly press and release the volume up button, then quickly press and release the volume down button. Finally, press and hold the side button until the recovery mode screen appears.

• For iPhone 7 or 7 Plus: Press and hold the side and volume down buttons, then release when the recovery mode screen appears.

• For iPhone 6s or earlier: Press and hold the side and home buttons until the recovery mode screen appears.

Once in recovery mode, iTunes will prompt you to update or restore your iPhone. To reinstall the firmware, select “Update.” If you have forgotten your passcode and want to start over, select “Restore.”

Method 3: Repair iOS with ReiBoot

If the first two methods don’t solve your issue, you can try using ReiBoot to repair your iOS. The standard repair mode will attempt to fix the problem without data loss. If your phone is not immediately recognized, you’ll receive step-by-step recovery mode instructions. You can get the firmware to your desired location and start the repair at any time.

We hope these methods were able to help you flash your iPhone’s firmware and fix